Floor Systems
GROUND SYSTEMS-FLOOR SYSTEMS SURFACE HARDENER?
Application of surface hardening, concrete surface abrasion and impact resistance is one of the preferred methods to enhance the. Onto the concrete surface hardener, freshly applied cement-based coverings as monolithic. In order for you to receive the best results the surface hardening applications "HASSAN" according to the surface to be applied to the Quartz and Corundum options select, the application is very important. This product use and which of the preferred venue will vary according to the load on the surface. Both MOHD HASSAN "Quartz" and "Corundum" natural, red and green color. Application will be made and the degree of the surface wet concrete is extremely important. Concrete surface hardener must be wet enough to get the need of moisture. If the surface is wet, which is more than it s going to take away their thick concrete and effectiveness of HASSAN. If the surface extra dry is to not connect the product to the surface will be negative and the result is enough. Depending on the dimensions of the floor 4-5 m wide are placed in a filled in the blank of ano. Where necessary the braided steel and jeans-import ano process is complete. The best way for the dissolution of the surface of the ALTOP spreader operation must be made on both sides of each of the ano. After the casting of concrete, mastarlanır, vibrating gauge application is provided with feet onto the Concrete thoroughly with settlement is no more than 2-3 mm. deep footprint plug going when HASSAN s 2/3 floors in equal proportion, by hand or mechanical spreader spreads sprinkled with. By sucking the juice of concrete material moisture and acquire a dark color. Make sure that the color is equal on each side of the floor. Rubbed thoroughly into the ground with a wooden float material is provided for integration. A quantity of material most straightedged and dilatation joints the edges of, 8 cm in case of a strip with a wooden float and sprinkled with eating. The remaining 1/3 part of the material is spread, sprinkled the ground surface by sprinkling acquire a dark color and floated to the ground with a wooden float freely on the surface of the tread so erect steel trowel (helicopter) is firm enough.