The important thing is that the water is locked against reinforced concrete slab. To do this, or coated with a waterproof cover terraces, these are classic system bituminous membranes, pvc membranes, epidiem membranes.

Capillary crack of reinforced concrete slab or the Crystal produced and would be locked in the concrete itself against water, applied to the edge with crystallized material file must be created using a rotated pooling.

Terrace roofs, waterproofing of cement-based material that produces particularly in Crystal. Because the crystalline materials, capillary cracks in concrete population and here camlaştırıp tıkadıkları instead of just one on concrete waterproofing for concrete in waterproofing.

In addition these materials above, double component cement-based material is covered with a layer of the membrane covering the application is achieved with half/full and flexible behavior cracks or breakage will be created a layer of insulation against water.

Exterior of the brick and plaster water considering you had them you must first impervious to water. There are several varieties of these;
  1-waterproof plasters can be used
  2-Sıvalarınızın is also used for the purpose of the thermal insulation on the sheathing if you make a layer of the system which is used on plasters in waterproof against water, you protect your brick walls and plaster.

Sıvalarınızda that cracks, fix with mortar, plaster water resistance into your Crystal producing still exterior lock your water. Waterproof exterior coatings to shield them from outside intrusion helps in maintaining your building against water.

According to different roof types has different waterproofing applications. The wooden roofs, metal roofs as covering membranes, shing are available. Terrace roofs, horizontal roofs with cement-based material under water ceramics insulation is usually the preferred waterproofing technique.

Terrace roof types, reinforced concrete slab are locked against the water with cement-based crystalline material,

Alkaline resistant cement-based materials, with two component file and latex additive ingredients created both a cover on the reinforced concrete and reinforced concrete slab will produce the Crystal.

We can separate the walls of buildings 2

  1-are the subterranean walls, reinforced concrete wall
  2-on the top of the walls, brick or reinforced concrete walls

Under the earth pressure against the walls of reinforced concrete in areas where the water that is a concrete water-sucking and material or covered with a waterproof from the outside cover is required or undergoing water within the concrete cracks and capillary crystalline ingredients we need to make waterproof the inside concrete.

In the brick wall of the unburied floor plaster is of waterproof plaster can be provided with waterproofing. In addition, plaster with waterproofing the façade layer will be built on also it is possible to provide. Water repellent, not waterproof is water-repellent coatings. Waterproof on your first brick for our much experimentation, or concrete wall against water lock and then paint is recommended.

In wet ceramic tile surfaces prior to coating the preparation is very important. Vertical surfaces, solid and smooth surface, there is a need for an absolute way to obtain excellent adhesion. This plaster with cement lime DOSER joining 400 prepared plaster. This plaster must be in every point in the infinitive. Rude waterproofing compounds is very good in terms of adhesion release will give you the results. In fact, in order to prevent cracking of the plaster, the more strength you can join into the Allmax Latex. Vertical surfaces, underlay much experimentation that we have done for horizontal surfaces s properly the spanking. Another issue is to know in wet insulation against water. Because ceramic tiles are all by themselves will not be able to show an insulation against water. Although the back of the front surface of ceramic tiles surfaces of waterproofing wet areas such as bathrooms, although especially waters can enter under the coating. Entering point is usually the point where ground water from creeks or wall switch.

They have a few small details left to do to make sure this doesn t happen. These are at the beginning of isolation. Insulation for cement-based waterproofing mortar or acrylic sealing mortars can be used. Application of brush or rolls of these products as well as through the flat part of the comb trowel 1-2 mm thickness can be applied to the surface in the shape to be created. At this point, the most important issue to be considered, where the wall point especially during floor insulation file supplement. Here at the junction of the two walls as vertically still needs to be done with the file supplement will give very good results the isolation. The use of insulation materials and driving patterns, it is necessary to note.

Another issue is joint. There s water in wet, prevent weathering and as it is known in places where mold too. Therefore we will use in wet, mold and algae within normal standard gap when.

To avoid this, do not make a mold resistant fungs, cracking, smooth surface that can generate silicon-based joint filling materials, as the use of products will give you much better results.

At the same time this gap normal junction point floor grouts used wall, the point where two walls in very good detaylandırılmalıdır.

Other matters are the points where the costs that these points are most frequently the waters move under the coating, insulation material and where the water charge is the absolute way twice, even if it can be done in 3 floors.

Another issue is the choice of the adhesive mortar, adhesive mortar for use in wet areas, such as high-strength at the same time must be a resistance adhesive mortar across the water. The application also carding method instead of the combined method so applied and kept both the ceramic back surfaces with adhesive mortar should be applied and kept the ground comb comb after both bonding should occur. This gluing method will not remain any gap in the back of the ceramic, grout or water down the coating in a way that will not hurt too much.

Bathroom, kitchen, WC in wet, such as volume of surface water across the first ceramic not downstairs. The second event is going to be a problem in our in our bathrooms and toilets in plumbing pipes or walls screed waste water, goes from leaking water pipes have a way downstairs and do not block the water insulation purposes.

Ceramics, plaster before the screed layer based concrete FishNet, a cement-based material is done in isolation, then the plumbing pipes. Ties necessary plasters and these layers on top again after ceramic architectural image is obtained. Only ceramic waterproofing.

Capillary crack of concrete with Crystal producing materials by producing water in the direction opposite direction came from the Crystal, it is called negative direction, it is possible to make a negative aspect of waterproofing. That way she couldn t get in the water and are protected against corrosion reinforcement in the concrete.

Water insulation in buildings, houses, non-humid, moisture free, wet, more comfortable living in dry environments. The first phase of a building waterproofing so basically starts from, rise of the upper floors from the basement, step by step, until the creation of the roof terrace is an application made. Here the aim is to shield them from outside intrusion of rain water, underground, underground water to enter into the building, cut their waters.

Waterproofing the basement of the building starts from the basics, garage floors, underground water is what we call the code to press six partitions, walls, and takes place on the basis of. Upstairs is WC, bathroom and kitchen floors and walls wet as volume areas, balconies, terraces and roof are waterproofing can be done.

Outside the building, pools, water depots, that contact with water purification tanks, concrete waterproofing every area where all that is needed.

Other than that, do not take water from outside the walls of the external brick for exterior waterproofing.

Waterproofing on soil contacting the walls, foundations, floors, roofs, balconies, foundations, flooring, roofs, balconies, bathroom, wc, water tanks and wet areas like pools can be enforced.

Prevents rusting of iron within the concrete, prevents it from falling and carrying capacity of the building protects your durability against earthquakes

-Prevents the formation of bacteria and mold in buildings

Water dripping from the ceiling, the basement of the rooftops and preventing Press provides healthy and comfortable environment.

-Extends the life of Buildings, reduce maintenance expenses

-Water storage and prevents water leaks in pools and protects water quality.