ROOF RIDGE ADHESIVE MORTAR
Product Description:
It is a cement-based, polymer-added adhesive mortar used in the assembly of roof ridge tiles.
It is suitable for TS EN 998-2 I G-M5 class
Public Works Pos No: 04.013/4
Areas of Use:
It is used to adhere the ridge tiles on roofs and to keep the color appearance.
It is used as a bonding mortar in roof repairs, chimney and chimney edges, roof eaves end, repairs.
Features:
It has high adhesion strength.
It does not crack with fiber additive.
Long working time and easy applicability.
It is resistant to water, moisture and frost.
It is durable and long-lasting.
Technical Specifications:
Appearance: Red and Colored Powder
Application Temperature: + 5ºC to + 35ºC
Water Mixing Ratio: 5.0-6.0 Liter / Bag
Rest Time of Mortar: 5-10 min.
Pot Life: 1-2 hours
Drying Time: 24 hours
Bond Strength: ≥ 0.3 N / mm²
Reaction to Fire: A1
Temperature Resistance: -25 C to + 70 C
The above values are given for +23 ºC and 50% relative humidity.
Pre-Application Preparation:
The application surface should be free of substances that prevent adhesion such as dust, oil, paint.
Sub-surfaces such as cracked plasters and weak surfaces that are not strong enough to carry the application should be cleaned from the application surface.
The floors that require repair should be repaired with special repair mortars at least 3-4 days before the adhesive is applied.
Application:
25 kg of Alfix Mahya is mixed with a low-speed mixer or trowel by pouring 5-6.5 liters of water into a clean container, until a lump-free mixture is obtained.
During the mixture, any additives not specified in the application instructions should not be added.
The prepared mortar is 5-10 minutes. let it rest for maturation and again 1-2 minutes. It should be mixed until it becomes homogeneous.
In-pot mixture should be consumed within 1-2 hours.
While the ridges are placed on the roof spine, they are glued together from the recesses with ridge adhesive.
The ridge sides are filled with adhesive without leaving any gaps.
After 1 hour of this application, the adhesive is given its final shape with a damp sponge.
Since the adhesion and freezing takes place approximately 48 hours after the application, the ridge tiles and applied surfaces should not be pressed within this period.
Warnings:
Avoid application at temperatures below + 5ºC and above + 35ºC.
Newly completed applications should be protected against adverse weather effects such as direct sunlight, excessive air flow, high air temperature (above + 35ºC), rain and frost in the first days.
Never add powder and water to the expired or crusted mortar in the container, discard the mortar.
Wash all tools and application equipment with clean water immediately after use.
Consumption: Approximately 600 grams
(For 1 ridge)
The amount of consumption is the values calculated theoretically in the laboratory environment; We recommend that consumption control sample application be carried out before the application.
Packing: 25 kg craft bags.
Storage and Shelf Life:
It should be stored in its unopened original package, in a cool and dry environment, protected from frost. For short term storage, maximum 2 palettes should be placed on top of each other and the shipment should be made on a first in, first out system. Palettes should not be stacked on top of each other during long term storage. It is 12 months from the date of production under suitable storage conditions. Opened packages should be stored under appropriate storage conditions and used within one week.
Safety Advices:
For more detailed information, please refer to the Safety Data Sheet.
Responsibility:
The application instructions and technical values given in this technical document are based entirely on our scientific and practical knowledge. These values may vary depending on the ambient conditions. Allmax Construction Chemicals reserves the right to make changes in products in line with technological developments. Allmax Yapı Kimyasalları cannot be held responsible for the results that may arise out of written recommendations regarding where and how the product will be used and / or due to incorrect use. Therefore, when using Allmax Construction Chemicals products, make sure that you use the right product in the right place. Allmax Construction Chemicals is only responsible for the quality of the product.
