The outer facades of the weather conditions, harsh effects (UV rays, hot and cold weather conditions etc.). That s why exterior brick applications, flexible bonding mortar should be used.

Brickwork joint applications, joint sealing material of water impermeability and elasticity is high, çatlam, but should be on the property.

Wall joint applications, the prepared mixture, joint fillers, transferred to the gun as possible, fixed feed rate and pressure joints are filled. Grouting applied coating materials should be corrected with rubber-tipped spatula. Grouting mortar has dried enough, then they should be cleaned with the help of a wet sponge overhanging.

Floor joint applications, the prepared mixture Grouting pistol and is filled with ground joints of plastic trowel and joint prevents cross-direction by space to remain. Grouting mortar has dried enough, then they should be cleaned with the help of a wet sponge overhanging. Joint applications made to high coating material strengthened absorbsion of stone with the aim to prevent staining the surface of application Grouting done with a gun, taşırılmaması and portions of the overflowing of the Grouting mortar dry cleaning is recommended.

Wet volume areas (terrace, Turkish bath, swimming pool etc.) needs to be done correctly the first waterproofing. Second from right, with the right adhesive coating materials must be made using the same techniques. After this application are true, finally the joints in places, a wet-volume water resistant as well resistant to heat and cold should be filled with the products.

There s water in wet, prevent weathering and as it is known in places where mold too. Therefore we will use in wet, mold and algae within normal standard gap when. To avoid them, the application for the selected products, mold, it should be noted whether the fungs resistant products.

Grouting material, appropriate amount of water should be mixed until a homogeneous mixture is obtained with. Mixture should be made with a low-speed mixer. Any contributions that are not specified in the application instructions katılmamalıdır. Putting more or less than the number specified in the cracking of the water, powder and can cause color defects.

Grouting material of rubber filled with ceramic and Grout trowel. The excess material is taken from diagonal movements of the joints. Deep joints, should unexpected collapse of the material first, then this process must be repeated. Don t lose your water glow, light-filled material joint cavity begins to harden, the entire surface with a damp sponge and cleaned, it is necessary to be able to finish its hydration water must be given. Coating material remains of the grout is cleaned with a damp sponge. Deletion is premature or very juicy when doing color surge problem can occur with a sponge bath. The sponge must be cleaned at frequent intervals. Grouting joint of ejaculation after dry to the touch, the surface should be cleaned with a dry cloth of the remaining ruins.