Tiled ceramic tile breakage, spillage, over time in blistering, cracking like deformations occur.
Because the
application of practices, as in the case of the laying of jointless coating due
to the expansion after a while tile bristling spills will occur.
Especially because
prior to the application of ıslatılmaması wall tiles wall tiles be poured by
leaving in the adhesive.
Cladding into the
adhesive mortar, for example an external material of cement based adhesive into
the plaster, lime, clay, sand, material strength of materials such as will
again reduce the deformation will result.
In particular, the use
of bonding and fuga mortar Cap life and not pay attention to the main reason
for the distortion again while dredging is one of.
Production, resulting
in error are usually the product with the introduction of an external material
from the outside to the inside. It is a condition that will identify the
manufacturer.
Resulting from errors
on use; for home users, especially while cleaning of ceramic tile, bleach,
hydrochloric acid exposure as high as supplies to clean up the surfaces of
materials, grouts to cause wear and tear after a while he got up from all over,
even after some time of broken.
Structural error,
especially close to the occurrence of water installations and points, in
ceramic tiles along the cracks.
The junction point of
the crosshead or at the point where the wall in kolanla, corresponding to the
point at the junction of two different building materials, ceramic tile in, due
to the different materials work in time along the cracks.
External venues
especially in choosing the wrong adhesive coating is used, combined where it
should be done by the method of application, especially don carding patlağına,
raised and caused flaking.
This and similar in a
lot of their why ceramic tile, breaks, spills. Why not, previously diagnosed
with the right materials, accurate diagnosis, the surface of the material is
very important in the right place.