SOCKET ACCELERATOR MORTAR ADDITIVE
Product Description:
It is an additive material that is desired to accelerate the setting and is used in all kinds of mortar applications.
Public Works Pos No: 04.613.C
Areas of Use:
It is used in all kinds of mortar and concrete applications where acceleration of setting is desired.
Features:
It increases the early strengths of concrete without adversely affecting the final strengths of concrete.
It does not contain chloride and does not damage the reinforcement.
Technical Specifications:
Appearance: Transparent liquid
Application Temperature: + 5ºC to + 35ºC
The above values are given for +23 ºC and 50% relative humidity.
Pre-Application Preparation:
Make sure that the application surface is cured and solid. The surface to be applied should be free from paint, oil, dust, etc. must be cleaned from materials. The sand to be used in the mixture must be clean, the cement must be fresh and not spoiled.
Application:
Betoquick 5 must be shaken well before use. The product should be mixed by adding to the mixing water required by the cement. Before starting the application, Betoquick 5 should be tested with the materials to be used in certain mixing ratios and the appropriate mixing ratio should be considered. Before use, suitability tests should be carried out. The prepared Betoquick 5-piece mixture should be added at the end of the mixing process.
Warnings:
Betoquick 5 should never be mixed directly into the dry mixture. Before use, if Betoquick 5 is frozen, it should be thawed in a place with high ambient temperature and should not be contacted directly with fire. The properties of the product do not change at the end of dissolution. Mortar and concrete applications should be preferred during the hottest hours of the day. There should be no snow and ice in the molds. Wash all tools and application equipment with clean water immediately after use.
Consumption:
The recommended amount is 1-2% of the cement weight.
Packing:
5 kg. plastic bottle
30 kg. plastic bottle
Storage and Shelf Life:
It should be stored in its unopened original package, in a cool and dry environment, protected from frost.
It is 12 months from the date of production under suitable storage conditions.
Opened packages should be stored under appropriate storage conditions and used within one week.
Safety Advices:
For more detailed information, please refer to the Safety Data Sheet.
Responsibility:
The application instructions and technical values given in this technical document are based entirely on our scientific and practical knowledge. These values may change depending on the ambient conditions. Allmax Construction Chemicals reserves the right to make changes in products in line with technological developments. Allmax Yapı Kimyasalları cannot be held responsible for the results that may arise out of written recommendations regarding where and how the product will be used and / or due to incorrect use. Therefore, when using Allmax Construction Chemicals products, make sure you use the right product in the right place. Allmax Construction Chemicals is only responsible for the quality of the product.
