MORTAR ADDITIVE AGAINST FROST
Product Description:
Mortar additive that accelerates the setting of cement-based mortars and increases their frost resistance in applications with frost risk..
Public Works Pos No: 04.613/7
Areas of Use:
In cases where the light frost effect will continue throughout the day,
After the application, in applications where there is a risk of frost during the night,
In situations where sudden temperature drop is likely,
In applications where high early strength is required,
Used when mold needs to be taken early.
Features:
Provides frost resistance, increases the strength of the mortar.
It provides fast reaching the values required for the strength of the mortar against frost. It does not contain chloride and does not damage the reinforcement.
Technical Spesifications:
Appearance: Transparent liquid
Pre-Application Preparation:
Take care that the application surface is cured and strengthened. The applied surface is free from paint, oil, dust, etc. must be cleaned from materials. The sand to be used in the mixture must be clean, the cement must be fresh and not spoiled.
Application:
Allmax Antifreeze should be shaken well before use. The product should be mixed by adding to the mixing water required by the cement. Before starting the application, Allmax Antifreeze should be tested with the materials to be used in certain mixing ratios and the appropriate mixing ratio should be taken into consideration. Before use, suitability tests should be carried out. The prepared antifreeze mixture should be added at the end of the mixing process.
Warnings:
Allmax Antifreeze should never be mixed directly into the dry mixture. Before use, if antifreeze is frozen, it should be defrosted in a place with high ambient temperature and should not be contacted directly with fire. The properties of the product do not change at the end of dissolution. Mortar applications should be preferred during the hottest hours of the day. There should be no snow and ice in the molds. Wash all tools and application equipment with clean water immediately after use.
If Allmax Antifreeze is frozen, it should be thawed in a high temperature place, brought to positive value and mixed. The material should not come into direct contact with fire.
Consumption:
The recommended amount is 2% of the cement weight. This ratio may vary between 1-5% depending on various factors such as the variety of materials used, ambient conditions, desired setting time. In order to get the desired performance values exactly, compatibility tests at different rates should be made by the applicator according to the application conditions and the local materials to be used.
Packing:
5 kg. plastic bottle
30 kg. plastic bottle
Storage and Shelf Life:
It should be stored in its unopened original package, in a cool and dry environment, protected from frost.
It is 12 months from the date of production under suitable storage conditions.
Opened packages should be stored under appropriate storage conditions and used within one week.
Safety Advices:
For more detailed information, please refer to the Safety Data Sheet.
Responsibility:
The application instructions and technical values given in this technical document are based entirely on our scientific and practical knowledge. These values may change depending on the ambient conditions. Allmax Construction Chemicals reserves the right to make changes in products in line with technological developments. Allmax Yapı Kimyasalları cannot be held responsible for the results that may arise out of written recommendations regarding where and how the product will be used and / or due to incorrect use. Therefore, when using Allmax Construction Chemicals products, make sure you use the right product in the right place. Allmax Construction Chemicals is only responsible for the quality of the product.
