READY-MIXED CONCRETE
Product Description:
Factory mix ready-mixed dry concrete mortar with cement based special fillers and additives.
TS EN 13813
Public Works Pos No: 04.485
Areas of Use:
Indoor and outdoor,
As ready screed under materials such as tiles, ceramic, granite ceramic, marble and natural granite,
In housing and garden areas, filling molds, garden walls, support and pillars, filling gaps in element surfaces such as walls, flooring, door and window lintels, beams and lintels, floor coverings, installation of prefabricated floors, floor grids, stairs, floor coverings, chimneys / Used in plumbing spaces and many other areas.
Features:
It is ready to use.
It saves time and labor.
It is resistant to water, frost and severe weather conditions.
It is suitable for underfloor heating systems.
Thanks to its homogeneous mixture, this product, which is a factory mix, offers the same and high quality at every point of the application compared to the concrete prepared by the construction site mixture with the classical method.
Technical Spesifications :
Appearance: Gray Powder
Dry Unit Weight: 1800 ± 300 kg / m³
Application Temperature: + 5ºC to + 35ºC
Water Mixing Ratio: 2.50-3.25 Liter / Bag
Rest Time of Mortar: 3-5 min.
Applicable Thickness: 5 cm (Single Layer)
Drying Time: 24 hours
Maximum Grain Size: 4.0 mm
Compressive Strength: C30
Compressive Strength: ~ 30 N / mm²
Flexural Strength: ~ 6 N / mm²
Reaction to Fire: A1
Temperature Resistance: -30 C to + 80 C
The above values are given for +23 ºC and 50% relative humidity.
Pre-Application Preparation:
The surface must be free from mold oil, dust, paint and adherence reducing materials.
Necessary repairs should be made on old floors.
In applications to be made on concrete and existing screed, it is important to prime the surface and increase adhesion.
Application:
25 kg. Allmax Concrete is poured into a container filled with approximately 2.5-3.25 liters of water and mixed with a low-speed mixer or trowel until a lump-free mixture is obtained.
The prepared mortar is 3-5 minutes. It should be rested and then mixed again and used.
Fresh concrete should be applied as soon as possible after mixing and its segregation should be prevented while it is transported from the mixer to the application point.
The applied mortar can be spread and corrected with the help of a trowel or other necessary hand tools.
In screed applications;
The prepared mortar is laid on a 3-10 cm thick surface and leveled.
When the surface is hardened, it is smoothed by mechanical finishing.
Warnings:
No foreign material (lime, cement, gypsum, etc.) should be added into the prepared mortar.
It is recommended to apply at temperatures between + 5ºC and + 35ºC.
In windy weather, the mortar should be protected against rapid drying.
It should not be applied on frozen surfaces.
Do not apply under direct sunlight.
In terms of the durability of the mortar, the surface should be watered at regular intervals within 7 days, 24 hours after the application, depending on the weather conditions.
For applications larger than 25 m², it is recommended to create dilatation at appropriate intervals.
Consumption: ~ 20 kg / m² for 1 cm thickness
The amount of consumption is the values calculated theoretically in the laboratory environment; We recommend that consumption control sample application be made before the application.
Packing: 25 kg craft bags.
Storage and Shelf Life:
It should be stored in its unopened original package, in a cool and dry environment, protected from frost. For short term storage, maximum 2 palettes should be placed on top of each other and the shipment should be made on a first in, first out system.
Palettes should not be stacked on top of each other during long term storage.
It is 12 months from the date of production under suitable storage conditions.
Opened packages should be stored under appropriate storage conditions and used within one week.
Safety Advices:
For more detailed information, please refer to the Safety Data Sheet.
Responsibility:
The application instructions and technical values given in this technical document are based entirely on our scientific and practical knowledge. These values may vary depending on the ambient conditions. Allmax Construction Chemicals reserves the right to make changes in products in line with technological developments. Allmax Yapı Kimyasalları cannot be held responsible for the results that may arise out of written recommendations regarding where and how the product will be used and / or due to incorrect use. Therefore, when using Allmax Construction Chemicals products, make sure that you use the right product in the right place. Allmax Construction Chemicals is only responsible for the quality of the product.
