WOOD MOLD SEPARATOR
Product Description:
It is a ready-to-use mold release oil containing special additives used to ensure that wood-derived molds can be easily separated from concrete.
Public Works Pos No: 04.116/1
Areas of Use:
It is used as a mold release agent in all kinds of wood-derived formwork systems.
Features:
It is ready to use.
By reducing the adhesion between mold and concrete; It provides easy removal of the mold and decreases the cleaning of the mold.
It provides a smoother concrete surface by reducing the air bubbles on the concrete surface.
It helps to clean the molds and reduces the need for cleaning.
Provides a smoother concrete surface.
It does not leave any dirt or stains on the concrete.
It does not make a color difference in concrete.
It increases the life of the mold and saves on general expenses.
It provides a cleaner and much more economical solution compared to old-fashioned methods such as burnt oil.
It is suitable for steam curing.
Technical Specifications:
Appearance: Creamy white liquid
Density: 0.92-0.97 kg / liter
Pre-Application Preparation:
Before use, molds should be dry and clean, free of concrete and rust residues. The product is ready to use and does not require continuous mixing, but it is recommended to shake it a little before use.
Application:
The application is made homogeneously on the mold surface with a brush, roller or spraying in one layer. For the product to achieve the best performance, it should be ensured that the product forms a thin film layer.
Warnings:
It is recommended to make preliminary trials before use.
Water should not be added to Oilmax ASP before and during use.
Molds should be protected from rain for the first few hours following the application.
Consumption: 100-200 gr/m²
The amount of consumption is the values calculated theoretically in the laboratory environment; We recommend that the consumption control sample is applied before the application
Packing: 30 kg of plastic drums
Storage and Shelf Life:
It must be stored in its original packaging, unopened. Shelf life is 12 months under appropriate storage conditions.
Oilmax ASP must be protected from frost. In cases exposed to frost, it should be thawed and mixed very well before using at room temperature without contacting with fire.
Safety Advices:
For more detailed information, please refer to the Safety Data Sheet.
Responsibility:
The application instructions and technical values given in this technical document are based entirely on our scientific and practical knowledge. These values may vary depending on the ambient conditions. Allmax Construction Chemicals reserves the right to make changes in products in line with technological developments. Allmax Yapı Kimyasalları cannot be held responsible for the results that may arise out of written recommendations regarding where and how the product will be used and / or due to incorrect use. Therefore, when using Allmax Construction Chemicals products, make sure that you use the right product in the right place. Allmax Construction Chemicals is only responsible for the quality of the product.
